Skip to main content

Create System Elements

Define the functional and physical architecture of your system as the foundation for all safety analysis.

Create a New Risk Analysis Document

Set up risk documents (FHA, SFMEA, DFMEA, FTA, CCA, PSSA, SSA) with proper templates and configurations.

Configure PowerSheet RTM Views

Organize requirements traceability matrices to map safety allocations across your V-Model workflow.

Configure the Compliance Matrix

Set up mapping between your safety requirements and regulatory compliance artifacts.

​
Setup Workflow

The Aerospace Safety Solution setup follows a logical progression: diagram Start by defining your system architecture, then create the risk analysis documents where hazards and requirements will be traced. Finally, configure your reporting views and compliance mappings to track progress toward certification.
Complete system element setup before creating risk documents. This ensures your failure conditions, failure modes, and safety requirements reference a complete, validated system architecture.
If you’re using both Aerospace Safety Solution and risksheet separately, refer to the Advanced Configuration and Configuration Management guides for deeper customization of risk document templates and column layouts.
Code: .polarion/nextedy/sheet-configurations/DO-160G Environmental Qualification.yaml, Component RTM.yaml, Configuration Index.yaml, Design Verification Sheet.yaml, Interface Control Matrix.yaml, Problem Report Tracker.yaml, Process Steps.yaml, Review Action Item Tracker.yaml, SOI Stage Gate Dashboard.yaml, Use Steps Specification.yaml, User Need Validation Sheet.yaml, characteristics.yaml, component-characteristics.yaml, customer-requirements.yaml, design-requirements.yaml, subsystem-functions.yaml, subsystem-verification.yaml, system-elements.yaml, test-verification.yaml (0.43) · .polarion/pages/spaces/_default/Program Manager Dashboard/page.xml, Safety Engineer Dashboard/page.xml, Design Engineer Dashboard/page.xml, VandV Engineer Dashboard/page.xml, Config Manager Dashboard/page.xml (0.38) · modules/RiskTemplates/PSSATemplate/attachments/risksheet.json (0.35)